Epson pro4880gd Printer Manual page 51

4. Press the button, then the
the button, then press the
Menu
STANDARD, WIDE, or WIDER
recommended for most paper types. Press the
save the platen gap setting.
5. Press the button, then the
6. Press the
Menu
The printer prints a pattern similar to the following:
1 2 3 4
7. Examine the printed pattern for the most evenly overlapping lines.
Choose the number with the most even lines. In the example shown
above, the lines under number 4 are the most even.
8. After printing the pattern,
button to select the number that you noted in step 7.
9. Press the
Menu
button, then the
any adjustments, as needed, and press the
setting.
You can also make similar settings using the printer driver software. For
instructions, see page 60 (Mac OS X) or page 86 (Windows).
• CUT METHOD
thinner media, or adjust the speed for thick media. You may need to
experiment to determine the cleanest cut for your paper.
• PPR FEED ADJ
you see white lines on your prints, or a higher value if you see dark
lines.
• EJECT ROLLER
non-Epson media. You may need to experiment to determine the
best setting for your paper.
Handling Paper and Other Media
button to display
. The
STANDARD
button to display
button twice to print the paper thickness pattern.
5 6 7 8 9 10
Smallest gap
THICKNESS NUM
button to save the selected value. Press the
button for the menu options shown below. Make
lets you decrease the cutting blade pressure for
helps eliminate banding. Choose a lower value if
lets you define the eject roller for printing with
51
PLATEN GAP
button to select
NARROW,
setting is
button again to
Menu
THICKNESS PAT
11 12 13 14 15
is displayed. Press the
button to save each
Menu
| 51
. Press
.
16