Moving The Printer On The Stand - Epson Pro 9000 Printer Manual

Caution
Do not roll the printer
on angled or uneven
surfaces.
Maintaining and Transporting the Printer
The first time you start printing after moving the printer, the print head
•
nozzles may be clogged. You may need to run a cleaning cycle (see
page 3-2) and realign the print head (see page 3-3) to ensure good print
quality.
If you reinstall the cartridges you removed before transporting the
•
printer, make sure the printer is turned off when you install them.
Otherwise, the printer will not be able to determine the correct level of
remaining ink and the
cartridge is almost empty.

Moving the Printer on the Stand

When you need to move the printer a short distance, such as within the same
building or facility, you can roll the printer on its casters. Follow these steps:
1. Make sure that the power cord, interface cable, roll paper spindles and
sheet media are removed, and the roll paper cover and lower cover are
closed.
2. Release the front casters and retract the stabilizer knobs.
3. Carefully roll the printer to its new location. Relock the casters and
extend the stabilizer knobs after moving.
The first time you start printing after moving the printer, the print head
nozzles may be clogged. You may need to run a cleaning cycle (see page 3-2)
and realign the print head (see page 3-3) to ensure print quality.
3-19
lights may not flash to warn you when a
Ink Out
| 3-19