Using Cut Sheet Paper Longer than 19 Inches
Before you start, make sure the printer is on and roll paper is not loaded for
printing. Then follow these steps:
1. Make sure the roll paper cover is closed.
2. Press the
Paper Source
comes on.
3. Make sure the
Operate
pull the paper set lever all the way up.
4. Feed the sheet into the paper slot until it extends through the slot. Align
the paper with the two rows of holes.
1-17
Handling Paper and Other Media
button repeatedly until the
light and
light are not flashing. Then
Pause
|
1-17
light
Sheet