Checking System Requirements; Installing The Software - Epson Pro 9000 Printer Manual

Using EPSON Drivers and Utilities for Windows

Checking System Requirements

Make sure your computer meets the requirements listed in the table below.
The memory requirements are for printing a 40 57-inch full-page color
image. Requirements may vary, depending on the size, complexity, and
resolution of your images.
System requirements
Component Minimum
Processor i486/25 MHz for Windows 95 and NT 4.0
i486/66 MHz for Windows 98
Pentium 133 MHz for Windows 2000
OS Windows 95, Windows 98, 2000, or
Windows NT 4.0 (service pack 4 or later)
Available 16MB RAM for Windows 95/98 or NT 4.0
memory 64MB RAM for Windows 2000
Hard disk 20MB free for Windows 95 and 98
40MB free for Windows NT 4.0 and 2000
Monitor VGA
CD-ROM Double-speed CD-ROM drive

Installing the Software

Make sure any virus protection programs are turned off before you begin.
Then follow these steps to install your printer software:
1. Make sure the printer is connected and turned off, then turn on your
computer.
2. Insert your printer software CD-ROM.
C-3
| C-3
Recommended
®
Pentium II 300 MHz
or higher
128MB RAM or more
For printing a file,
space equivalent to
double the file size
Super VGA or better
Quad-speed or faster