Responding To Control Panel Lights And Messages - Epson Pro 9000 Printer Manual

Error messages
Message
COVER OPEN
INK COMPART.
OPEN
INK LOW
INK OUT
LOAD PAPER
Following is a list of the items displayed. Note that all parts on the list
(except the ink cartridges and paper cutter) need to be replaced by
authorized EPSON service centers.
INK LEFT-K
INK LEFT-C
INK LEFT-M
INK LEFT-LC
INK LEFT-LM
INK LEFT-Y
CUTTER LIFE
4. Press the
SelecType
Responding to Control Panel Lights and
Messages
When your ink or paper runs out or a problem occurs, a message appears on
the display. The lights on the control panel come on or flash. The following
table lists the messages alphabetically and includes an explanation and
instructions for correcting the problem.
Light Explanation
Pause light on Lower cover is open.
Pause light on You are replacing the ink
cartridge(s) and the ink
compartment cover is open.
Ink Out light(s) Ink cartridge(s) are nearly
flashing empty (printing continues).
Ink Out light(s) Ink cartridge(s) are empty
on (printing stops).
Paper Out Paper set lever is up while
light on loading paper.
Monitoring and Configuring the Printer
(black) TOTAL PRINTS
(cyan)
WASTE INK
(magenta)
CR MOTOR
(light cyan)
PF MOTOR
(light magenta)
HEAD UNIT
(yellow)
CLEANER
(paper cutter)
button to exit the Printer Status menu.
2-5
(waste ink system)
(carriage motor)
(paper feed motor)
(print head)
(cleaning unit)
Response
Close the lower cover. Make sure all
three magnetic tabs are fastened.
Close the ink compartment cover
when you are finished replacing the
ink cartridge(s).
Replace ink cartridge(s) indicated by
Ink Out light(s). See page 3-7 for
instructions.
Replace the ink cartridge(s) indicated
by Ink Out light(s). See page 3-7 for
instructions.
Pull the paper set lever down after
you load paper.
| 2-5