Using Optional Items
17. Connect the cables and plug in the printer.
Note:
When uninstalling the printer stand, turn off the printer, unplug the power cord, disconnect any cables, and then
perform the installation procedure in reverse.
Related Information
"List of Optional Items" on page 320
&
"Wiring Codes with Clamps" on page 322
&
Moving the Printer While the Printer Stand is Attached
Before moving the printer, uninstall the printer stand. Complete the steps for moving the printer, and then perform
the steps in the following images.
>
>
Printer Stand
Moving the Printer While the Printer Stand is Attached
328