Checking System Requirements; Installing The Software - Epson Stylus Pro 9000 Printer Manual

Using EPSON Drivers and Utilities for Macintosh

Checking System Requirements

Make sure your Macintosh meets the requirements listed in the table below.
The memory requirements are for printing a 40 57-inch full-page color
image. Requirements may vary, depending on the size, complexity, and
resolution of your images.
System requirements
Component Minimum
Processor PowerPC
OS System 7.5.1
Available 14MB (foreground printing)
memory 23MB (background printing)
Hard disk 10MB free for installing the
software
CD-ROM Double-speed CD-ROM drive

Installing the Software

Before you start, turn off all virus protection programs. See your anti-virus
software documentation for instructions. Then follow these steps to install
your printer software:
1. Insert your printer software CD-ROM.
2. When the
Installer
instructions on the screen.
3. When you see the "installation complete" message, click
Follow the steps in the next section to select your printer using either the
serial interface or an AppleTalk
B-3
Recommended
300 MHz G3 or higher processor
System 7.6 or later
128MB (total)
2GB recommended
Quad-speed or faster
icon appears, double-click the icon. Then follow the
®
connection.
| B-3
Restart.