Connecting Photopc P-1000 To A Printer; Selecting The Appropriate Printer Driver - Epson PhotoPC P-1000 User Manual

Connecting PhotoPC P-1000 to a printer

The following procedure shows how to connect the
PhotoPC P-1000 to the Stylus Photo 960. For other
printers, refer to your printer's manual.
1. Make sure that PhotoPC P-1000 and the printer
are turned off.
2. Remove the connector cover and connect the USB
cable.
Note:
❏
Keep the connector cover in a safe place.
❏
Use the appropriate cable for your printer. See
"Supported printers" on page 36 for details.
3. Connect the other end of the USB cable to the
connector on the printer.
Note:
See your printer's manual for the location of the cable
connector on your printer.

Selecting the appropriate printer driver

When printing images the first time, set the
appropriate printer driver for the PhotoPC P-1000.
Note:
When you change the language setting, the printer driver
settings are automatically reset. So you need to set the
printer driver again.
37
Direct Printing
4
4
4
4
4
4
4
4
4
4