Epson PhotoPC P-1000 User Manual page 11

Epson user's guide printer photopc p-1000
Table of Contents

Advertisement

When using the AC adapter
Use only the type of power source indicated on
the AC adapter's label, and always supply power
directly from a standard, domestic power outlet
with a power cord that meets the relevant local
safety standards.
Place the AC adapter near an electrical outlet
where the power cord can be easily unplugged.
The AC adapter is designed for use and provided
with this product. Do not attempt to use it with
other electronic devices unless specified.
Do not remove the AC adapter from this device
during operations.
The AC adapter included is designed for use with
this product. Use of any other adapter could result
in fire, electrical shock, or injury.
Use only the power source that meets the power
requirements indicated on the label attached to
the product. If you are not sure of the power
supply specifications in your area, contact our
local power company or contact our Customer
Support.
Make sure the total amperage of all devices
plugged into the power outlet does not exceed the
power outlet's ampere rating.
If you plan to use this product in Germany, the
building installation must be protected by a 16
amp circuit breaker to provide adequate
short-circuit protection and over-current
protection for this product.
Do not use a damaged or frayed AC adapter.
If you use an extension cord with this product,
make sure the total amperage of all devices
plugged into the extension cord does not exceed
the cord's amperage rating.
Never disassemble, modify, or attempt to repair
the AC adapter by yourself except as specifically
explained in this guide.
Do not use power outlets controlled by wall
switches or automatic timers.
Do not use power outlets on the same circuit as
large motors or other appliances that may cause
voltage fluctuations.
5
Introduction
1
1
1
1
1
1
1
1
1
1

Advertisement

Table of Contents
loading

Table of Contents