Connecting The Camera To Your Printer - Epson PhotoPC L-500V Reference Manual

Connecting the Camera to Your Printer

Use the USB Type A cable that comes with your camera to connect it to your
printer.
Make sure the camera is turned off before you begin.
You can conserve battery power by using the optional AC adapter when
you print from the camera. See page 25 for instructions.
1. Connect the large end of the USB cable to the correct EXT I/F port on
your printer.
2. Open the connector cover on the side of the camera and plug the small end of the cable into
the camera's USB port as shown.
3. Turn on the camera.
USB
cable
Using Direct Print
62