Changing The Printer's Default Settings - Epson LX-300+II User Manual

Changing the Printer's Default Settings

While you can often change the printer's settings through your software
or printer driver, you may sometimes need to change one or more of the
printer's default settings from the printer's control panel using the
Default Setting mode. The table below lists the settings and available
options. For detailed descriptions, see your Reference Guide.
Setting
Page length for tractor
Skip over perforation
Auto tear off
Auto line feed
Print direction
Software
0 slash
High speed draft mode
I/F (interface) mode
Auto I/F wait time
Baud rate
Parity
Data length
Parallel I/F bidirectional
mode
Packet mode
Character table
International character
set for italic table
Manual feed wait time
Buzzer
Auto CR (in IBM PPDS
emulation mode)
IBM character table
36 Using the Control Panel
Options (default in bold)
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6,
12, 14, 17
On, Off
On, Off
On, Off
Bi-D, Uni-D
ESC/P, IBM 2380
On, Off
On, Off
Auto, Parallel, Serial, USB
10 seconds, 30 seconds
19200, 9600, 4800, 2400, 1200, 600, 300 BPS
None, Odd, Even, Ignore
8 bit, 7 bit
On, Off
Auto, Off
Italic, PC 437, PC 850, PC 860, PC 863, PC 865, PC
861, BRASCII, Abicomp, Roman 8, ISO Latin 1, PC
858, ISO 8859-15
Italic U.S.A., Italic France, Italic Germany, Italic U.K.,
Italic Denmark 1, Italic Sweden, Italic Italy, Italic
Spain 1
1 second, 1.5 seconds, 2 seconds, 3 seconds
On, Off
On, Off
Table1, Table 2