Epson LX-300+II User Manual page 10

7. Remove the new ribbon
cartridge from the package
and gently turn the ribbon
tightening knob
counterclockwise to take up
any slack in the ribbon.
8. Use your hand to slide the print head to the middle of the printer,
then insert the ribbon cartridge as shown below and make sure it
clicks into place.
9. Use a pencil point or
similar object to guide
the ribbon between
the print head and the
ribbon guide. Be
careful not to twist or
crease the ribbon.
Then turn the
ribbon-tightening
knob to help feed the
ribbon into place.
10 Setting Up the Printer
Print
head