Printing With The Pull Tractor - Epson LX-300+II User Manual

Printing with the pull tractor

To load continuous paper using the pull tractor, you must move the
tractor to the pull tractor position, as described below. If your tractor is
already installed in this position, make sure the printer is turned off and
skip to step 6.
1. Turn off the printer; then remove the printer cover and the paper
guide.
2. Remove the paper tension unit by gently squeezing the lock tabs
and pulling it out of the printer.
3. Pull the paper release lever forward to the continuous paper
position.
4. To remove the tractor from the push position, gently squeeze the
lock tabs on both sides and then rotate the tractor up to pull it away
from the printer.
20 Paper Handling