Product Information; Safety Information; Hot Parts Caution Symbol; Important Safety Instructions - Epson LX-300+II User Manual

Chapter 5

Product Information

This chapter contains important information about your printer,
including the safety instructions and product warranty.

Safety Information

Read all of these safety instructions before using the printer. In addition,
follow all warnings and instructions marked on the printer itself.

Hot Parts Caution Symbol

This symbol is placed on the print head and other parts to
K
indicate that they may be hot. Never touch those parts just after
the printer has been used. Let them cool for a few minutes
before touching them.

Important Safety Instructions

❏
Do not place the printer on an unstable surface or near a radiator or
heat source.
❏
Place the printer on a flat surface. It will not operate properly if it is
tilted or placed at an angle.
❏
Do not block or cover the slots and openings in the printer's cabinet,
and do not insert objects through the slots.
❏
Use only the type of power source indicated on the printer's label.
❏
Connect all equipment to properly grounded electrical outlets.
Avoid using outlets on the same circuit as photocopiers or air
control systems that regularly switch on and off.
❏
Do not use a damaged or frayed power cord.
❏
If you use an extension cord with the printer, make sure the total
ampere rating of all devices plugged into the extension cord does
not exceed the cord's ampere rating. Also, make sure the total
ampere of all devices plugged into the electrical outlet does not
exceed the electrical outlet's ampere rating.
Product Information
45