User Preferences; Setting Silent Control Operation; Setting Lockout Feature - Frigidaire FGGF301DNB Important Safety Instructions Manual

ADJUSTING OVEN OFFSET TEMPERATURE
The temperature in the oven has been pre-set at the
factory. When fi rst using the oven, be sure to follow
recipe times and temperatures. If you think the oven
is cooking too hot or too cool for the temperature you
select, you can adjust the actual oven temperature to be
more or less than what is displayed. Before adjusting,
test a recipe by using a temperature setting that is
higher or lower than the recommended temperature. The
baking results should help you to decide how much of an
adjustment is needed.
To adjust the oven temperature:
1. Press and hold upper or lower oven BAKE pad for 6
seconds. The preset adjustment number will appear
and "UPPER" or "LOWER" will fl ash in the display.
2. To increase the temperature use the
desired change. The temperature may be increased as
much as 35°F (19°C). To decrease the temperature use
the pad to enter the desired change. The temperature
may be decreased as much as 35°F (19°C).
3. Wait 4 seconds to accept the temperature change and
the display will return to the time of day. Press CANCEL
pad to reject the change if necessary.
NOTE
• Each oven temperature can be individually adjusted.
• The oven temperature adjustments made with this feature
will not change the Self-Clean cycle temperature or the
Broil temperature.
• The oven temperature adjustments are permanent and
will stay forever in the unit memory unless you manually
change it again. Even a power outage will not reset
these changes. Follow the same procedure again if you
wish to change it to a different setting.

SETTING SILENT CONTROL OPERATION

The DELAY START pad controls the Silent Control Operation
feature. The Silent Control Operation feature allows the oven
control to be operated without sounds or beeps whenever
necessary. If desired the control can be programmed for
silent operation and later returned to operating with all the
normal sounds and beeps.
To change control from normal sound operation to
silent control operation:
1. Press and hold DELAY START pad for 6 seconds. A
beep will sound, "-- --" will appear, "DELAY" will fl ash
in the display. After 6 seconds, a beep will sound and
"SP" (speaker) or "- -" will appear in the display.
2. Press
operation and silent operation mode.
Note: If "SP" appears, the control will operate with
pad to enter the
normal sounds and beeps. If "- -" appears, the control is
in the silent operation mode.
3. Wait 5 seconds to accept the change or press CANCEL
pad to reject the change.
Note: The control will always beep at the end of a minute
timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.

SETTING LOCKOUT FEATURE

The CANCEL pad controls the Oven Lockout feature.
The Oven Lockout feature automatically locks the oven
doors (Self-cleaning ovens only) and prevents the
oven from being turned on. It does not disable the
display of the clock, the minute timer or the interior
oven lights.
To activate the Lockout feature:
Make sure the oven doors are closed. Press and hold
pad for 3 seconds. After 3 seconds a beep will sound,
"DOOR", "LOCKED" will fl ash, "Loc" and
the display. Once the oven door is locked the "DOOR" and
"LOCKED" indicator will stop fl ashing and remain in the
display.
To reactivate normal operation:
Press and hold
The oven icon, "LOC" and
display. "DOOR" and "LOCKED" will fl ash in the display
until the oven door has completely unlocked. The
appliance is again fully operational.

USER PREFERENCES

or pad to switch between normal sound
pad for 3 seconds. A beep will sound.
will disappear from the
will appear in
17