User Preferences - Frigidaire FGEF300DNB Important Safety Instructions Manual

Complete owner's guide (english)
Hide thumbs Also See for FGEF300DNB:
Table of Contents

Advertisement

USER PREFERENCES

ADJUSTING OVEN OFFSET TEMPERATURE
The temperature in the oven has been pre-set at the
factory. When fi rst using the oven, be sure to follow recipe
times and temperatures. If you think the oven is cooking
too hot or too cool for the temperature you select, you
can adjust the actual oven temperature to be more or less
than what is displayed. Before adjusting, test a recipe by
using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help
you to decide how much of an adjustment is needed.
To adjust the oven temperature:
1. Press and hold upper or lower oven BAKE pad for 6
seconds. The preset adjustment number will appear
and "UPPER" or "LOWER" will fl ash in the display.
2. To increase the temperature use the
desired change. The temperature may be increased as
much as 35°F (19°C). To decrease the temperature use
the
pad to enter the desired change. The temperature
may be decreased as much as 35°F (19°C).
3. Wait 4 seconds to accept the temperature change and
the display will return to the time of day. Press CANCEL
pad to reject the change if necessary.
NOTE
Each oven temperature can be individually adjusted.
The oven temperature adjustments made with this feature
will not change the Self-Clean cycle temperature or the
Broil temperature.
The oven temperature adjustments are permanent and
will stay forever in the unit memory unless you manually
change it again. Even a power outage will not reset
these changes. Follow the same procedure again if you
wish to change it to a different setting.
18
SETTING SILENT CONTROL OPERATION
The DELAY START pad controls the Silent Control Operation
feature. The Silent Control Operation feature allows the oven
control to be operated without sounds or beeps whenever
necessary. If desired the control can be programmed for
silent operation and later returned to operating with all the
normal sounds and beeps.
To change control from normal sound operation to
silent control operation:
1. Press and hold DELAY START pad for 6 seconds. A
beep will sound, "-- --" will appear, "DELAY" will fl ash
in the display. After 6 seconds, a beep will sound and
"SP" (speaker) or "- -" will appear in the display.
2. Press
pad to enter the
operation and silent operation mode.
Note: If "SP" appears, the control will operate with normal
sounds and beeps. If "- -" appears, the control is in the
silent operation mode.
3. Wait 5 seconds to accept the change or press CANCEL
pad to reject the change.
Note: The control will always beep at the end of a minute
timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.
SETTING LOCKOUT FEATURE
The
Lockout feature automatically locks the oven doors (Self-
cleaning ovens only) and prevents the oven from being
turned on. It does not disable the display of the clock, the
minute timer or the interior oven lights.
To activate the Lockout feature:
Make sure the oven door is closed. Press and hold the oven
you want to lock
beep will sound, "DOOR", "LOCKED" will fl ash, "Loc" and
will appear in the display. Once the oven door is locked
the "DOOR" and "LOCKED" indicator will stop fl ashing and
remain in the display.
To reactivate normal operation:
Press and hold the oven you want to unlock
seconds. A beep will sound. The oven icon, "LOC" and
disappear from the display. "DOOR" and "LOCKED" will fl ash
in the display until the oven door has completely unlocked.
The appliance is again fully operational.
or
pad to switch between normal sound
pad controls the Oven Lockout feature. The Oven
pad for 3 seconds. After 3 seconds a
pad for 3
will

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fgef300dnfFgef300dnwFgef301dnbFgef301dnfFgef301dnw

Table of Contents