Removing The Dust Cover; Removing The Front Cover; Paper Feed Knob - Epson LQ-1500 User Manual

Removing the dust cover

The dust cover is the brown plastic cover which keeps dust out of
the print mechanism and reduces the noise level when the printer is
on. If you are using
cover.
Lift off the dust cover. It just sits in a recess on the top of the printer
so removal is easy Set the dust cover aside if you will be needing it.
the
Put it away in
unit.

Removing the front cover

The next assembly step, installing the ribbon cartridge, first
requires a bit of disassembly. You should remove the front cover to
gain easier access to the print head when you install the ribbon.
Open the front cover by tilting the back edge up and toward you.
Push left and up. Gently lift off the cover and set it aside (see Figure
You'll see it's easier to do than it is to describe!
1-5).
Paper
Figure 1-4.
the
optional tractor unit, you will not use the dust
printer box if you plan to use
feed knob
the
optional tractor
7