Paper Inserted - Epson LQ-1500 User Manual

Advance the paper by turning the paper feed knob clockwise.
With the platen release lever closed, the paper should easily catch
on the platen and be fed through.
Note: If the paper is not feeding correctly (or easily), stop, turn the
paper feed knob counterclockwise, and at the same time gently
pull the paper back out. Check the paper to be sure it is not
wrinkled or torn and try again.
2. Stop turning and release the platen release lever (pull it forward)
when the top of the paper reaches the two pin-feeders. The paper
should now be free to move without using the paper feed knob (see
Figure 3-7).
3. Adjust the pin-feeders to the paper width by sliding them inward to
line up with the paper pin-holes. Place the paper pin-holes onto the
tractor pins, close the pin-feeder covers, and adjust the paper ten-
sion by pulling the pin-feeders gently apart (see Figure 3-8).
38
Figure 3-6. Paper inserted