To Connect Home Stereo/Computer - ProForm Crosstrainer 970 User Manual

HOW TO CONNECT YOUR HOME STEREO
Note: If your stereo has an unused UNE OUT Jack,
see Instruction A below. If the LINE OUT Jack Is
being used, see InstmcIfon B.
A. Plug one end of the audio cable into the jack
beneath the console of the crosstrainer. Plug the
other end of the cable into the included adapter.
Plug the adapter into the LINE OUT jack on your
stereo.
HOW TO CONNECT YOUR COMPUTER
Note: If your computer has a 3.Smm LINE OUT
lack, see instruction A. If your computer has only a
PHONES Jack, see Instruction B.
A. Plug one end of the audio cable into the jack
beneath the console of the cmsstrainer. Plug the
other end of the cable into the LINE OUT jack on
your computer.
L i
........... i°.°
Adapter--_
Audio Cable
B. Plug one end of the audio cable into the jack
beneath the console of the crosstrainer. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA Y-adapter (available
at electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
RCA Y-adapter. Plug the RCA Y-adapter into the
LINE OUT jack on your stereo.
Audio
Cable
ie----r--,
y_..........J
RCA
Y-adapter
Adapter
.......
Wire removed from
LINE OUT jack
Audio j
Cable =_
B. Plug one end of the audio cable into the jack
beneath the console of the crosstrainer. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your computer• Plug your
headphones or speakers into the other side of the
Y-adapter.
[--_ ®
i _ _ 3.5mm _/
: Audio Cable = Y-adapter-_
.............
Headphones/Speakers
15