Near The Upright (4), Connect The Wires On The - ProForm PFEVEL12716.0 User Manual

9. Untie and discard the wire tie on the Main
Wire (110).
While a second person holds the Console (7)

near the Upright (4), connect the wires on the

Console to the Main Wire (110) and to the
Sensor Wires (63).
Insert the excess wire into the Upright (4).
10. Tip: Avoid pinching the wires. Attach
the Console (7) to the Upright (4) with four
M4 x 16mm Screws (101); start all the Screws,
and then tighten them.
9
7
10
7
101
11
63
4
110
Avoid pinching
the wires
4
101