Epson FX-1180 User Manual page 72

4. Release the left and right sprockets by pushing the blue
sprocket lock levers backward.
5. Slide the left sprocket approximately 12 mm (0.5 inch) from
the far left position and pull the blue lever forward to lock
it in place. Then slide the right sprocket to match the width
of your paper, but do not lock it. Move the center support
midway between the two sprocket units.
The triangle mark on the
inside of the front cover
indicates the point
furthest to the left where
printing can begin.
12 mm (0.5 inch)
Printing on Continuous Paper
3
3-9