4. Press the LF/FF D button to move the top-of-form position up
on the page, or press the Load/Eject U button to move the
top-of-form position down on the page.
Note:
o
The printer has a minimum and a maximum top-of-form
position. If you try to adjust it beyond these limits, the printer
beeps and stops moving the paper.
o
When the paper reaches the default top-of-form position,
the printer also beeps and stops moving the paper briefly. You
can use the default setting as a reference point when adjusting
the top-of-form position.
5. After you set the top-of-form position, press the Pause button
to exit micro adjust mode.
3-36
Printing on Continuous Paper