Two Vcrs For Tape Editing - Sony FD Trinitron WEGA KV-34HS420 Operating Instructions Manual

Two VCRs for Tape
Editing
_ Using
SVIDEO jacks?
See page I 5.
Connecting two VCRs lets you record from one VCR to the other. By
connecting them as shown below, you can view (monitor) what is
being recorded.
Toconnecttwo VCRs for
tape editing
1
Use an A/V cable to connect the playback VCR's A/V output
jacks to the TV's A/V input jacks.
2 Use an A/V cable to connect the recording VCR's A/V input
jacks to the TV's MONITOR OUT jacks.
Ill
LINE
IN
I@@@1 u,Eo°T
AUDIO R AUDIO L VIDEO
! ! !
1
AN cable
AIV cable
AUDIO R AUDIO L VIDEO
LINE OUT
[®®®]o°, ,°
Ii_i,o]J,t"ri1"_lkVIIli|
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
Notes on Using This Connection
View (monitor) what is being Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
recorded illustration above).
Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See
to operate the VCR(s) "Programming the Remote Control" on pages 37-38.
Activate the TV remote Press VCR/DVD FUNCTION.
control to operate the VCR(s)
Control VCR functions with See "Operating a VCR" on page 43.
the TV remote control
Label video inputs to easily See the instructions for setting up Video Labels on pages 58-59.
identify equipment connected
to the TV