Sony FD Trinitron WEGA KV-34HS420 Operating Instructions Manual page 52

N If 4:3 Default is set to
anything but Off, the Screen
Mode setting changes only for
the current channel. When you
change channels (or inputs),
Screen Mode is automatically
replaced with the 4:3 Default
setting. To retain the current
Screen Mode setting as channels
and inputs are changed, set 4:3
Default to Off.
4:3 Default Wide Zoom Select to enlarge the 4:3 size picture, while
Select the d@_ult the upper and lower parts of the picture are
Screen Mode to condensed to fit the wide screen.
use for 4:3 sources N0imai Seleci io return ihe 4:3 pict[_re fo normai
mode.
Full Select to enlarge the, 4:3 picture
horizontally only, to fill the wide screen.
Zoom
Select to enlarge the 4:3 picture
horizontally and vertically to an equal
aspect ratio that fills the wide screen.
Off
Select to continue using the current Screen
Mode setting when the channel or input is
changed.
Vertical Center Allows you to move the position of the picture up and
down in the window. (Available only in Wide Zoom and
Zoom modes.)
Press • or • and press @ to choose a correction
between +15 and -15 (Zoom mode), and +5 and -5 (Wide
Zoom mode).
Vertical Size Allows you to adjust the vertical size of the picture.
(Available only in Wide Zoom and Zoom modes.)
Press • or • and press @ to choose a correction
between +7 and -7.
51