Sony FD Trinitron WEGA KV-34HS420 Operating Instructions Manual page 61

]To go directlyto
programming Timer1 or 2,
press@ insteadof
pressing,*..
[]To returnto the Timer
Menuafter programmingone
of the Timers, p ress@
when the highlight is inthe
channelnumberfield.
[]To returnto the Timer
Menu after settingthe
CurrentTime,press@
when the highlight is inthe
minutefield.
[]You canalso changethe
ScreenMode settingusing
the SCREEN MODEbuttonon the
remotecontrol.
CI0ck/Timers Select to set the clock and to program your TV to turn
on and off at two scheduled viewing times.
Timer 1 You can use the Timers to
Timer 2 program the TV to turn on and
off and tune to a specific
channel at two scheduled
viewing
times.
Timer 1 and Timer 2 are not available to be set until you
set the Current Time.
1 Press t1"or • to highlight Timer 1 or
Timer 2. To set the timer, move the joystick ,_.
2 Press t1"or • to highlight one of the following
options, then press @.
Program Select to set the Timer by day,
time, duration, and channel.
Off Select to turn off the Timer.
(Your previous settings are,
saved.)
3 If you selected Program in step 2, Press t1" a nd • to
set the day(s), hour, minute, duration, and
channel number. Press @ or ,_ to confirm
each setting and move to the next setting. Press
_, to go back to the previous setting.
4 Press MENUto exit the Menu. An LED on the
front panel will light, indicating the timer has
been set.
CurrentTime
1 Press @ to select Current Time.
2 Press t1"and 4 to set the current time (day, hour,
and minute). Press @ or ,_ to confirm each
setting and move to the next setting. Press _, to
go back to the previous setting.
Press MENUto exit the Menu.
Screen Mode Allows you to minimize the size of the "black bars"
and increase the picture size of 480i signals that have
been upconverted to 720p or 1080i. For details, see
page 41.
Normal Select to return the picture to its
normal size.
Zoom Enlarges the picture size.
Z_ The Screen Mode option is grayed out when it is
not available.