Using The Timer Menu - Sony FD Trinitron WEGA KV-34HS420 Operating Instructions Manual

Using the Timer Menu ..... ......
Toaccess the Timer Menu, follow these steps:
1. Display m enu 2. Highlight_ 3. Select
MENU
To exit the Menu. press MENU.
Selecting Timer
Options
I_lTo go directlyto
programmingTimer1or 2 in
step 1,press@ instead of
pressing*.
N Toreturnto the Timer
Menu after programmingone
of the Timers, p ress@
when the highlight is in the
channelnumberfield.
N Toreturnto the Timer
Menu after settingthe
CurrentTime,press@
when the highlight is in the
minute field.
The Timer Menu includes the following options:
Timer 1 You can use the Timer to program the TV to turn on and
Timer 2 off and tune to a specific channel at two scheduled
viewing times.
Timer 1 and Timer 2 are not available to be set until you set
the Current Time.
1 Press 4"or ,I, to higMight Timer 1or Timer2. To set the
time, press *.
2 Press 4"or • to highlight one of the following
options, then press @.
Program Select to set the Timer by day, time,
duration, and channel.
Off
Select to turn off the Timer. (Your previous
settings are saved.)
3 Press 4. and • to set the day(s), hour, minute,
duration, and channel number. Press @ or * to
confirm each setting and move to the next setting.
Press _, to go back to the previous setting.
4 Press MENUto exit the Menu. An LED on the front
panel will light, indicating the timer has been set.
CurreniTime i Press _and _ to set the current time iday, hour, and
minute). Press @ (or press *) to confirm each
setting and move to the next setting. Press _, to go
back to the previous setting.
2 Press MENUto exit the Menu.
To reset the Clock or Timers
[] Press RESETon the remote control, when in the Timer Menu, to
reset to the factory defaults.
57