Two Vcrs For Tape Editing - Sony GRAND WEGA KDF-42WE655 Operating Instructions Manual

Two VCRs for Tape
Editing
Using
S VIDEO jacks?
See page 38.
If you connect two VCRs, you can record from one VCR to tile other while
using your LCD projection TV to monitor what is being recorded,
i i i ¸ ! ! ! ii< i i i ! i ¸¸
Using A/V cables, connect tile playback VCR's AUDIO and VIDEO
OUT jacks to the recording VCR's AUDIO and VIDEO IN jacks.
Using A/V cables, connect the recording VCR's AUDIO and VIDEO
OUT jacks to the LCD projection TV's AUDIO and VIDEO IN jacks.
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
A oo¢1 IJNE
OUT IN
LINE
IN
LUNE
OUT
ooTIo I
AUDIO-L (white) ..........
WOEO ( ve,ow) ................................ f
AN cable (not supplied)
A/V cable (not supplied)
I._ To perform tape editing, set the LCD projection TV to the video input
intended for playback by pressing TV/VIDEOon the remote control.
!_ You may need to change the video input on your VCR. Consult your
VCR'soperating manual for instructions.
/'_ If your VCRs haveS VIDEOjacks: For best picture quality, use an
S VIDEOconnection instead of the yellow video cable on your combined
AN cable.
Using an S VIDEOcable, connect the playback VCR'sS VIDEOOUT jack
to the recording VCR's S VIDEO IN jack. S VIDEO does not provide
audio, so audio cables must be connected to provide sound.
J_ You cannot record signals from equipment connected to the Y, PB,PR
input.
42