Satellite Receiver And Vcr - Sony FD Trinitron WEGA KV-34HS420 Operating Instructions Manual

Satellite Receiver
and VCR
Using
SVIDEO jacks?
See page 15.
Toconnecta satellite receiverand VCR
1
Connect the CATV cable to the single (input) jack of the splitter.
2 Use a coaxial cable to connect one of the splitter's two output
jacks to the TV's VHF/UHF jack.
3 Use a coaxial cable to connect the splitter's other output jack to
the satellite receiver's VHF/UHF input jack.
4 Connect the satellite antenna cable to the satellite receiver's
satellite input jack.
5 Use a coaxial cable to connect the satellite receiver's VHF/UHF
output jack to the VCR's VHF/UHF input jack.
6 Use an A/V cable to connect the satellite receiver's A/V output
jacks to the TV's A/V input jacks.
7 Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
8 Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 32.
Notes on Using This Connection
Watch the satellite receiver Press TVNIDE0 repeatedly to select the satellite receiver input (VIDEO 3 in
the illustration).
Watch the VCR Press TVNIDE0 repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Set up the TV remote control If you have a non-Sony VCR or satellite receiver, you must program the
to operate the satellite remote control. See "Programming the Remote Control" on pages 37-38.
receiver or VCR
Activate the TV remote For the satellite receiver, press SAT/CABLE FUNCTION. For the VCR, press
control to operate the satellite VCR/DVD FUNCTION.
receiver or VCR
" 3 "
Control satellite receiver and See "Operating a Satellite Receiver" on page 43 and OFeratmg a VCR" on
VCR functions with the TV page 43.
remote control
Label video inputs to easily See the instructions for setting up Video Labels on pages 58-59.
identify equipment connected
to the TV