Using The Channel Menu - Sony FD Trinitron WEGA KV-34HS420 Operating Instructions Manual

Using the Channel Menu
To access the Channel Menu, follow these steps:
I. Display menu 2. Highlight_ 3. Select
To change settings, press 4, € _, ,_.
Press C_) to colffirm the selection.
To exit the Menu. press MENU.
Selecting Channel
Options
[]Channels that you set to
be skippedcan be accessed
only with the 0-9 buttons.
The Channel Menu includes the following options:
Favorite Channels Lets you set up a list of your favorite channels. For
details, see "Displaying a List of Favorite Channels" on
page 42.
Cable On Select if you are receiving cable channels
with a CATV cable.
Off Select if you are using an antenna.
You should run Auto Program after Changingthis
opti0n.
ChannelFix Off
Turns off Channel Fix.
have a cable box use the cable box or satellite receiver to
or satellite change channels. Select one of these
receiver settings if you connected the equipment to
connected the VHF/UHF jack.
Video 1 Use this setting if you have connected the
equipment to the A/V input jacks.
Auto Program Automatically sets up the channel list on the TV for all
receivable channels.
Channel Allows you to customize the channel list that appears
Skip/Add when you use the CH+/- buttons.
1 Press t1"or €, to scroll through the channels until you
find the channel you want to skip or add. Then press
@ to select it.
2 Press t1"or !, to toggle between Add or Skip. Then press
@ to select.
3 To add or skip more channels, repeat steps 1 and 2.
4 Press _, to return to the Channel Setup Menu, or
press MENUto exit the Menus.