Technical Data - Epson C I - 4 0 4 User Manual

8. Technical Data

The following technical data refers to the Personality Module PM SER/PAR.
Print head technology
Serial Impact Dot Matrix (SIDM) technology.
Paper path
Flat bed technology.
Print head
24 needles, needle diameter 0.25 mm (0.01 inch), lifetime approximately
350,000 pages (standard DIN letter).
Fonts
Data, Roman, San Serif, Courier, Prestige, Script, OCR B, OCR A, Orator-C,
Orator, DATA LARGE; all fonts (except Data and DATA LARGE) in Letter
Quality (LQ) and Near Letter Quality (NLQ). OCR A, OCR B only in LQ.
Character Attributes
Bold, double strike, italic, underline, double underline, overline, strike through,
sub/superscript, condensed; double, triple, quadruple up to eightfold height and
width; DATA LARGE up to 999-fold size.
Character Pitch
Standard character pitches are: 10, 12, 15, 17.1, 18, 20 cpi and proportional. In
addition, commands are defined to select non-standard character pitches. It is
also possible to print overlapped characters. Fonts will be compressed if smaller
pitches are selected.
Emulations
®
- IBM 4207 Proprinter XL24 (AGM)
®
- EPSON LQ 1060 / 2550 / ESC/P2
8-1