Technical Data - Epson MTX 1345 Operator's Manual

7. Technical Data

The following technical data refers to the standard Personality Module
PM SER/PAR.
Print head technology
Serial Impact Dot Matrix (SIDM) technology.
Paper path
Flat bed technology.
Print head
24 needles, needle diameter 0.25 mm (0.01 inch), lifetime approximately
350,000 pages (standard DIN letter)
Fonts
Data, Letter Gothic, Letter Gothic Italic, Courier, Micro, Orator, Orator-C,
Roman, Prestige, Script, OCR A, OCR B, DATA BLOCK, DATA LARGE; all
fonts (except Data, DATA BLOCK and DATA LARGE) in Letter Quality (LQ) and
Near Letter Quality (NLQ). OCR A, OCR B only in LQ.
Character Attributes
Bold, double strike, italic, underline, double underline, overline, strike through,
sub/superscript, double/triple height, double/triple width, double/triple/quadruple
size, condensed.
Character Pitch
Standard character pitches are: 10, 12, 15, 17, 18, 20 cpi and proportional. In
addition, commands are defined to select non-standard character pitches. It is
also possible to print overlapped characters. Fonts will be compressed if smaller
pitches are selected.
Emulations
®
- IBM 4207 Proprinter XL24 (AGM)
®
- EPSON LQ 1060/2550 / ESC/P2
- Philips GP 310/490
Technical Data
Print Speed (at 10 cpi)
- Draft Quality 600 cps,
- Near Letter Quality 300 cps,
- Letter Quality 150 cps .
Throughput acc. to ECMA-132
Standard Letter (Dr. Grauert)
a) Sinlgle Sheet
Draft Quality: 490 pages/h
Near Letter Quality: 398 pages/h
Letter Quality: 248 pages/h
b) 1-play fanfold
Draft Quality: 507 pages/h
Near Letter Quality: 398 pages/h
Letter Quality: 251 pages/h
Character Sets (see also Appendix B "Character Set Tables")
- ISO-7-Bit in 11 national versions incl. ASCII, IBM-PC and -PS/2 (multilingual)
- ISO 8859/1 IBM Character Set 1/2 incl. 14 national versions.
- IBM Code Page 437, 850, 860, 863, 865.
- EPSON Extended Graphic Character Set incl. 15 national versions.
Barcodes
- Code 39, 2 of 5 industrial, 2 of 5 interleaved, Codabar (Monarch), EAN 8,
EAN 13, Code 93, MSI Mod 10/10, UPC-E, UPC-A, Code 128 (incl.
EAN 128), and Postnet (see also Appendix G Barcode Quick Reference)
Graphics
Max. resolution (V x H). 180 x 360: Single pass
360 x 360: Double pass.
Print format
136 characters at 10 cpi
Line Spacing
2, 3, 4, 6, 8, 12 n/360 lpi
*
depending on the selected font
7-1 7-2
*