1.3
Site Considerations
Environment Conditions
-
Install the printer in an area away from any heat source, air conditioner or
strong drafts.
-
Avoid installing the printer in a dusty or humid environment.
Work Location
-
Place the printer on the stand or a flat, solid level area such as a desk.
-
Slots and openings in the printer's housing are provided for ventilation;
always ensure that these openings are not obstructed.
-
When processing fanfold paper always place the printer with its front edge
slightly off the edge of the table.
-
Also ensure that the cables at the rear of the printer do not interfere with the
output paper path.
Power Requirements
-
No special wiring is required. A typical office wall outlet is sufficient.
-
Do not plug into the same wall outlet other equipment besides the printer
such as coffee machines, copy machines or air conditioners.
Getting Started
1-5