Usb Media - Brother Entrepreneur Pro PR1000e Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
7 Using the same operation described in step
5
, secure the USB cable with the rear USB
cord clamp.
8 Arrange the USB cable between the USB
cord clamps so that the cable does not
interfere with the operation of the machine.
● Store the protective caps, which were
removed in step
accessory case so they will not be lost.
Memo
1
, in the included

USB media

You can recall a specific embroidery pattern from
either directly USB media or a folder in the USB
media. If the embroidery pattern is under the folder,
move down layers of folders following a path to it.
For details on storing a pattern, refer to "USB
media" on page 213.
Note
● USB media and reader/writer units can be
purchased at electronic/computer dealer.
● Some USB media may not be usable with
this machine. Please visit our web site
"http://solutions.brother.com" for more
details.
● The processing speed may vary by port
selection and quantity of data.
Insert the USB media into the primary (top)
1
USB port on the machine.
Depending on the type of USB media being
used, either directly plug the USB device into
the machine's USB port on the right side of
the operation panel or plug the USB Card
Reader/Writer into the machine's port.
Note
● Do not insert anything other than USB
media into the USB media port.
Otherwise, the USB media drive may be
damaged.
Selecting an Embroidery Pattern 173
5