Temporary Needle Bar Setting - Brother Entrepreneur Pro PR1000e Operation Manual

EMBROIDERING SETTINGS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Temporary Needle Bar Setting

After embroidering begins, the machine can be stopped at a color change and a different needle bar can be
specified for the next color to be sewn.
By substituting an upper thread color already threaded on a different needle bar, the time for sewing can be
saved. For example, similar color thread can be substituted for temporary use.
1 While sewing the color before the one that
you wish to change, touch
changes to .
After the color currently being sewn is
finished, the threads are trimmed and the
machine stops.
• The start/stop button can be pressed at the
color change to stop the machine, but, in
that case, stop the machine after the
threads are trimmed.
Touch .
2
The temporary needle bar setting screen
appears.
142
3 Touch the key for the needle bar threaded
with the thread that you wish to embroider
so that it
with.
To cancel the setting, touch
4 Touch
The embroidering screen appears again.
.
.