Removing The Table - Brother Entrepreneur Pro PR1000e Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Removing the table

1 Loosen the two thumb screws, lift up the
table, and then pull it off toward you.
1 Thumb screw
2 After the pins on each side reach the notches
in the guide plates, raise the table to lift the
pins up through the notches.
1 Pin
2 Notch
Remove the table from the machine.
Carefully pull out the table so that it does
3
not hit the machine.
4 Tighten the thumb screws on the table.
Installing the Included Table 253
7