Features Of The Console; How To Operate The Console - Weslo PURSUIT 310 CS User Manual

FEATURES OFTHECONSOLE
Theeasy-to-use console
features five modes that pro-
vide instant exemise feedback during your workouts.
The modes are described below.
Speed--This mode displays your pedaling speed, in
miles per hour or kilometers per hour.
"rime--This mode displays the elapsed time. Note: If
you stop pedaling for a few seconds, the time mode
will pause.
Distance---This mode displays the distance you have
pedaled, in miles or kilometers.
Calorie--This mode displays the approximate number
of calories you have burned.
Scan--This mode displays the speed, time, distance,
and calorie modes, for a few seconds each, in a
repeating cycle.
HOW TO OPERATE THE CONSOLE
Make sure there are batteries in the console (see
BA'I-I'ERY REPLACEMENT on page 10). If there is a
thin sheet of clear plastic on the console, remove it.
Follow the steps below to operate the console.
1. To turn on the power, press the On/Reset button or
begin pedaling. The entire display will briefly
appear; the console will then be ready for use.
2. Select one of the modes:
Scan modem
When the power Mode Indicators
is turned on, the
scan mode will be
selected automati-
cally. A mode indi-
cator will appear
below the word
=SCAN" to show DISTANCE
that the scan
mode is selected,
and a second
mode indicator will show which mode is currently
displayed. Note: If you have selected a different
mode, repeatedly press the Mode button to rese-
lect the scan mode.
Speed, time, dis-
tance, or calorie
mode--To select
one of these
modes for continu-
ous display,
repeatedly press
the Mode button.
The mode indica-
tors will show
SCAN
which mode is selected. Make sure there is not a
mode indicator below the word "SCAN."
Note: The console can display speed and dis-
tance in either miles or kilometers, To change
the unit of measurement, press the On/Reset
button for about five seconds. The letters mph or
km/h will appear in the displayto show which unitof
measurement is selected. When the batteriesare
replaced, it may be necessary to reselect the
desired unitof measurement.
3. To reset the display at any time, press the
On/Reset button.
4.
To turn off the power, simplywait for a few minutes.
The console has an "auto.off" feature. If the
pedals are not moved and the console buttons
are not pressed for a few minutes, the power
will turn off automatically to save the batteries.
9