Casio E-Con EA-200 User Manual page 32

(4) When the name is the way you want, tap [OK].
• This displays the Custom Probe dialog box.
(5) Configure the following parameters on the Custom Probe dialog box.
Parameter
Slope Input the slope for the linear interpolation formula.
Intercept Input the intercept for the linear interpolation formula.
Unit Name Input up to eight characters for the unit name.
Warm-Up Specify the warm-up time for the sensor in seconds, from 0 to 99.
(6) After all of the parameters are the way you want, tap [Set] to save the custom probe
and close the Custom Probe dialog box.
• This saves the custom probe data in ClassPad memory as a variable with the name
you specified in step (3). The custom probe data is locked, which means that it
cannot be edited using another application on the ClassPad. Keep the custom probe
data locked.
For more information about locked variables, see the ClassPad 300/ClassPad 300
PLUS User's Guide (1-7 Variables and Folders).
3-13
Setup
Description
20050601 20031201