Casio E-Con EA-200 User Manual page 19

Basic Steps for Configuring Sampling Parameters
(9) Use the [Sample] and [Trigger] tabs of the Setup dialog box to configure the required
parameters.
• For details about the required parameters in each mode, see "Mode Parameters" on
page 3-5.
(10) To apply the current settings on the Setup dialog box, tap [Set].
• This closes the Setup dialog box.
(11) You can start sampling immediately or you can save the setup in memory for later
recall.
• To start sampling immediately, tap V.
See "5 Executing a Sampling Operation" for more information.
• To store the setup in memory, tap [SetupMem] on the menu bar, and then tap [Store].
See "4 Using Setup Memory" for more information.
2-9
20031201