Setup; Setup Overview - Casio E-Con EA-200 User Manual

3 Setup

This chapter explains the various parameters you can configure with the Setup dialog box.
Important!
• Configuring advanced setup parameters is optional in the case of single-sensor sampling.
See "To configure advanced parameters for a single sensor" on page 3-2.
• With multiple-sensor sampling, advanced setup parameters are part of the normal
configuration procedure. See steps (7) through (10) under "To configure parameters for
sampling with multiple sensors" on page 2-7.

Setup Overview

Tapping [Setup] on the Sensor Setup window menu bar displays the Setup dialog box. The
Setup dialog box has the three tabs shown below.
[Sample] Tab
The following describes each of the tabs in detail.
[Sample] Tab and [Trigger] Tab
These tabs let you configure advanced parameters for the tab ([Single] or [Multiple]) that is
currently open on the Sensor Setup window. The [Sample] tab has parameters that control
how sampling is performed, while the [Trigger] tab has parameters that control the event that
triggers sampling. See "Configuring Advanced Sampling Parameters" on page 3-2 for more
information.
[Graph] Tab
This tab is for selecting options that control how sampled data is graphed. See "Configuring
Graph Window Options" on page 3-11 for more information.
3-1
Setup
[Trigger] Tab
20040201 20031201
[Graph] Tab