Shooting Still Images - Canon POWERSHOT SX500 IS User Manual

Trying the Camera Out
Shoot.
Shooting Still images
_Focus.
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and green frames are displayed
to indicate image areas in focus.
If [Raise the flash] is displayed, lift the
flash with your finger to prepare it for use.
If you prefer not to use the flash, push it
down with your finger, into the camera.
_Shoot.
Press the shutter button all the way
down.
As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
Keep the camera still until the shutter
sound ends.
Your shot remains displayed on the
screen for about two seconds.
Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
27