Trying The Camera Out; Shooting Still Images - Canon PowerShot SX710 HS Getting Started

Trying the Camera Out

Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
Turn the camera on and enter
1
[ ] mode.
Press the ON/OFF button.
Set the mode dial to [
Compose the shot.
2
To zoom in and enlarge the subject, move
the zoom lever toward [
you watch the screen, and to zoom away
from the subject, move it toward [
(wide angle).
Shoot.
3

Shooting Still Images

Press the shutter button lightly (1).
The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down (2).
If [Raise the flash] is displayed, move
the [ ] switch to raise the flash. It will fire
when shooting. If you prefer not to use
the flash, push it down with your finger,
into the camera.
].
] (telephoto) as
]
7