Canon POWERSHOT SX500 IS User Manual page 14

Safety Precautions
When using the flash, be careful not to cover it with your fingers or
clothing,
This could result in burns or damage to the flash.
Avoid using, placing or storing the product in the following places:
- Places subject to strong sunlight
- Places subject to temperatures above 40 °C (104 °F)
=Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery,
resulting in electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger
casing.
The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
Do not aim the camera at bright light sources (such as the sun on a
clear day).
Doing so may damage the image sensor.
When using the camera on a beach or at a windy location, be careful
not to allow dust or sand to enter the camera.
This may cause the product to malfunction.
in regular use, small amounts of smoke may be emitted from the
flash.
This is due to the high intensity of the flash burning dust and foreign
materials stuck to the front of the unit. Please use a cotton swab to remove
dirt, dust or other foreign matter from the flash to prevent heat build-up and
damage to the unit.
Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may
occur.
Before you discard the battery, cover the terminals with tape or other
insulators.
Contacting other metal materials may lead to fire or explosions.
14