Still Images/Movies (Smart Auto) - Canon POWERSHOT SX500 IS User Manual

Shooting (Smart Auto)
® Still ImageslNIovies
(_ To restore camera sound if you have accidentally deactivated it
(by holding the
<DISR>
button down while turning the camera on),
press the <MENU> button and choose [Mute] on the [_1'] tab, and
then press the <_><_> buttons to choose [Off].
® Still images
(_ A flashing [_:_] icon warns that images are more likely to be blurred
by camera shake. In this case, mount the camera on a tripod or
take other measures to keep it still.
If your shots are dark despite the flash firing, move closer to
the subject. For details on the flash range, see "Specifications"
(_217).
The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the focusing
range (shooting range), see "Specifications" (_217).
To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
A blinking [},] icon displayed when you attempt to shoot indicates
that shooting is not possible until the flash has finished recharging.
Shooting can resume as soon as the flash is ready, so either press
the shutter button all the way down and wait, or release it and
press it again.
55