Windows Client Setup - TRENDnet TW100-BRV204 User Manual

TW100-BRV204 User Guide

Windows Client Setup

To connect to the PPTP (VPN) Server in the VPN Broadband Gateway:
•
The Microsoft VPN feature in the VPN Broadband Gateway must be enabled and config-
ured, as described in the previous section.
•
Each user must have a login (username and password) on the VPN client database on the
VPN Broadband Gateway.
•
The remote client PC must be configured as described in the following sections.
•
It is assumed that remote users have a Broadband (not dial-up) connection to the Internet.
Windows 98/ME
1. Click Start - Settings - Dial-up Networking
2. Select Make New Connection
3. Type a name for this connection, and ensure that "Microsoft VPN Adapter" is selected.
Click "Next" to continue.
Figure 99: Windows ME VPN Remote Host
4. Enter the Internet IP address or domain name of this device. (If you don't have a fixed IP
address, you can use a Dynamic DNS service to obtain a domain name.)
Click "Next" to continue.
Figure 98: Windows ME VPN Adapter
112