Connecting To A Computer; Transferring Files To The T.sonic - Transcend T.sonic 615 User Manual

Connecting to a Computer︱
If you are using Windows Media Player 10 and want to play WMA-DRM10 music
files, you must set the T.sonic's Music Transfer Mode to MTP to transfer and
synchronize music files between the computer and your T.sonic 615.

Transferring Files to the T.sonic

If you want to use your T.sonic 615 to listen to music other than the Radio, you must transfer MP3,
WMA, or WMA-DRM10 music files to the player. When the T.sonic 615 is connected to a
computer, it is locked into transferring files. You will not be able to play or record any music at
this time. Please disconnect your T.sonic 615 from the computer when you want to use the player.
1. Plug the small end of the USB cable into the Mini USB port on the T.sonic and plug the
large end of the cable into an available USB port on your desktop or notebook computer.
While the T.sonic™ is connected to a computer, it can only be used for transferring files.
The T.sonic 615's rechargeable Li-ion battery will begin charging.
2. When connected to a computer the T.sonic 615's screen will display a "READY" message,
indicating that files can be loaded onto the player.
You cannot play or record music when the T.sonic 615 is connected to a
computer.
If you are using Windows® a new Removable Disk drive with a newly assigned drive letter
representing the T.sonic 615 will appear in the My Computer window.
Figure 5. Connecting to a Computer
29