Connecting To A Computer; Transferring Files To The T.sonic - Transcend T.sonic 650 User Manual

If you are using Windows Media Player 10 and want to play WMA-DRM10 music files, you
must set the T.sonic's Music Transfer Mode to MTP to transfer and synchronize music files
between the computer and your T.sonic 650.
If you want to use your T.sonic 650 to listen to music other than the Radio, you must transfer MP3, WMA, or
WMA-DRM10 music files to the player. When the T.sonic 650 is connected to a computer it is locked into
transferring files. You will not be able to play or record any music at this time. Please disconnect your T.sonic
650 from the computer when you want to use the player.
1. Plug the small end of the USB cable into the Mini USB port on the T.sonic and plug the large end of the cable
into an available USB port on your desktop or notebook computer. While the T.sonic™ is connected to a
computer, it can only be used for transferring files. The T.sonic 650's rechargeable Li-ion battery will begin
charging.
2. When connected to a computer the T.sonic 650's screen will display a "READY" message, indicating that
files can be loaded onto the player.
You cannot play or record music when the T.sonic 650 is connected to a computer.

Connecting to a Computer

Transferring Files to the T.sonic

Figure 8: Connecting to a Computer
24