Variable Flame Adjustment - Superior SDV35-N Care And Operation Instructions Manual

HI/LO Variable
Flame Height
Manifold Pressure Tap
Adjustment
OUT
Pilot Adjustment
Screw
Piezo Igniter
OptionalBurnerON/OFF
Rocker Switch
Figure 3
Manifold Pressure
Piezo Igniter
Tap
Main Gas
HI/LO Variable
Control Knob
Flame Height
OFF/PILOT/ON
Adjustment
OptionalBurnerON/OFF
Rocker Switch
Figure 4
Inlet Pressure Tap
Gas
Inlet
IN
Piezo Igniter
Main Gas
Control Knob
OFF/PILOT/ON
Blower ON/OFF Rocker
Switch
Gas
Outlet
Inlet Pressure Tap
Piezo Igniter
Blower ON/OFF Rocker
Switch
Honeywell Millivolt Gas Valve
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Gas
Outlet
Terminals
TPTH,TP & TH
SIT Millivolt Gas Valve
Gas
Inlet
Variable Flame Height Adjustment
All Millivolt appliances are equipped with a
variable gas control valve. Flame height for
these models may be adjusted through a range
between fixed low and high settings while the
appliance is in operation. Adjust the flame
height as desired after lighting the appliance by
rotating the variable adjustment control knob
(HI/LO) located on the front of the valve (refer
to Figure 3 or 4).
9