Port 80H Post Codes; Port 80H Post Code Ranges - Intel DCCP847DYE Specification

Intel Desktop Board DCP847SKE Technical Product Specification
4.3

Port 80h POST Codes

During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O
port 80h. If the POST fails, execution stops and the last POST code generated is left at
port 80h. This code is useful for determining the point where an error occurred.
Displaying the POST codes requires a POST card that can interface with the Debug
header. Refer to the location of the Debug header in Figure 1.
The following tables provide information about the POST codes generated by the BIOS:
Table 28 lists the Port 80h POST code ranges
•
Table 29 lists the Port 80h POST codes themselves
•
Table 30 lists the Port 80h POST sequence
•
NOTE
In the tables listed above, all POST codes and range values are listed in hexadecimal.
Table 28. Port 80h POST Code Ranges
Range
0x00 – 0x05
0x10, 0x20, 0x30,
0x40, 0x50
0x01 – 0x0F
0x11 – 0x1F
0x21 – 0x29
0x2A – 0x2F
0x31 – 0x35
0x36 – 0x3F
0x41 – 0x4F
0x50 – 0x5F
0x60 – 0x6F
0x70 – 0x7F
0x80 – 0x8F
0x90 – 0x9F
0xA0 – 0xAF
0xB0 – 0xBF
0xC0 – 0xCF
0xD0 – 0xDF
64
Subsystem
Entering SX states S0 to S5.
Resuming from SX states (0x10 –0x20 – S2, 0x30 – S3, etc.)
Security (SEC) phase
PEI phase pre MRC execution
MRC memory detection
PEI phase post MRC execution
Recovery
Platform DXE driver
CPU Initialization (PEI, DXE, SMM)
I/O Buses: PCI, USB, ATA etc. 0x5F is an unrecoverable error. Start with PCI.
BDS
Output devices: All output consoles.
For future use
Input devices: Keyboard/Mouse.
For future use
Boot Devices: Includes fixed media and removable media. Not that critical since
consoles should be up at this point.
For future use
For future use