Starting A Shoot With A Few Seconds Of Pre-Stored Picture Data (Picture Cache Function: With The Hkdw-703); The Hkdw - Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual

For detailed information on setting whether or not
recording start markers are recorded, see "Setting for
recording good shot marks on the LTC-UBIT area on the
tape" on page 39.
3-2-5 Starting a Shoot with a Few
Seconds of Pre-Stored Picture Data
(Picture Cache Function: with the
HKDW-703)
By installing an optional HKDW-703 extension board in
the camcorder, the camcorder is able to constantly store a
few seconds (up to 8 seconds) of the most current picture
and sound data in the board's memory.
As a result, when you press the VTR START button or the
VTR button on the lens, the recording starts with the data
stored a few seconds before.
Setting the Picture Cache time/Picture
Cache mode
To record in Picture Cache mode, you need to turn on
Picture Cache mode and set the picture data storage time
(Picture Cache time) using the USER menu.
The Picture Cache time and VTR SAVE/STBY switch
settings determine the number of seconds of picture data
that will be stored in memory and recorded when you press
the VTR START button or VTR button on the lens.
The following table shows the approximate number of
seconds worth of picture data (counting back from the time
you begin recording) that will be recorded from memory.
However, when changing from SAVE to STBY, or under
the special situations explained in the notes on this page,
the actual amount of data recorded may be shorter.
Picture Cache time setting and recording start point
Picture Cache Recording start point
time
VTR STBY mode VTR SAVE mode
8 (seconds) (For About 8 seconds
50i/25PsF/ before
24PsF/23.98PsF
format)
7 (seconds) (For About 7 seconds
59.94i/29.97PsF before
format)
6 (seconds) About 6 seconds
before
5 (seconds) About 5 seconds
before
4 (seconds) About 4 seconds
before
3 (seconds) About 3 seconds
before
Picture Cache
time
2 (seconds)
1 (second)
0 (seconds)
1) For 50i/25PsF/24PsF/23.98PsF format, you can record about 5 second of
Notes
• After selecting the Picture Cache mode, immediately
• During playback or recording review, the picture data is
Setting procedure
1
About 5 seconds
before
2
About 4 seconds
before
About 4 seconds
1)
before
About 4 seconds
before
About 4 seconds
before
About 3 seconds
3
before
Recording start point
VTR STBY mode VTR SAVE mode
About 2 seconds
before
About 1 second
before
About 0 seconds
before
picture data stored in the memory.
changing the Picture Cache time, or performing
playback or recording review, the picture data stored in
memory before this operation becomes unstable. This
means that when you press the VTR START button or
the VTR button on the lens, the previously stored picture
data will not be recorded.
not stored in the HKDW-703's memory. Picture data
corresponding to the duration of playback or recording
review will not be in memory and will not be recorded on
tape.
MENU knob MENU ON/OFF switch
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the
viewfinder screen.
Turn the MENU knob until the FUNCTION 1 page
appears.
When the question mark
appears at the left corner of
the title page, you can
switch the pages.
Turn the MENU knob
clockwise or
counterclockwise to display
the desired page
Push the MENU knob.
About 2 seconds
before
About 1 second
before
About 0 seconds
before
41
Recording