No.
Page
M09
TIMECODE
M10
VTR MODE
156
Menu List
Item
Settings
TC OUT
AUTO/GENE
5)
DF/NDF
DF/NDF
EXT-LK UBIT
INT/EXT
LTC UBIT
FIX/TIME
VITC UBIT
FIX/TIME
WATCH AUTO ADJ
OFF/ON
UBIT GROUP ID
000/101
REC TALLY BLINK
OFF/ON
REC START BEEP
OFF/ON
LCD DISPLAY
TIMER/OFF/CONT TIMER
HOLD
LCD HOLD TIMER
1H/3H/8H
SHOT TIME DISP
MD:HM/DM:HM/
D:HMS
VIDEO OUT (F/R)
EE/PB
STBY OFF TIMER
OFF/5MIN/10MIN/
30MIN/60MIN
STOP KEY FREEZE OFF/FRAME/
FIELD
Default
Description
AUTO
Selects the time code signal output.
AUTO: Outputs the time code generator
output during recording and outputs the
time code reader output during playback.
GENE: Outputs the time code generator
output during recording and playback.
DF
Sets DF or NDF mode.
DF: Drop frame mode
NDF: Non-drop frame mode
INT
Sets whether the LTC UBIT setup value locks
to an INT or an EXT source when the time
code is locked to an external source.
INT: Internal lock
EXT: External lock
FIX
Sets the data to be recorded in UBIT of LTC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
FIX
Sets the data to be recorded in UBIT of VITC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
ON
Turns the automatic time correction function
of the built-in clock on/off. With ON, the time
of the built-in clock matches the time data of
the user bits of an external time code.
000
Selects the UBIT GROUP ID.
ON
Turns the tally illumination control on/off in the
event of BATTERY BEFORE END/TAPE
BEFORE END.
OFF
Turns the alarm sound at REC START/STOP
on/off.
Sets the time code (TC) display after power-
off as follows.
TIMER: The TC display turns off after the
elapse of the time set by the LCD HOLD
TIMER below.
OFF: Not displayed.
CONT: Displayed.
1H
Sets the duration of time after which the TC
display is to be turned off after power-off,
when LCD DISPLAY HOLD is set to TIMER
(H: hours).
MD:HM
Selects the format of the time to be displayed
on the LCD.
MD:HM: Month, day, hour, minute
DM:HM: Day, month, hour, minute
D:HMS: Day, hour, minute, second
EE
Selects the video output signal during FF/
REW.
EE: Input signal
PB: Playback signal
60MIN
Sets the length of time for the stand-by off
timer when the VTR SAVE/STBY switch is set
to STBY.
OFF
Selects the type of frozen picture to be used
when the recorded video signal is stopped by
pushing the STOP button during playback.